Mounting: Screws and Anchors (recommended)

1. Mark hole placement. Keep in mind the shelve will shift approximately 1/2" right once mounted.

2. Drill holes with 3/16" bit.

3. Gently hammer in anchors.

4. Screw in screws, but not completely. Leave approximately 1/8" between screw head and wall.

5. Align shelf large holes with screw heads. Apply pressure with one hand on front of shelf and gently tap/push left side of shelf to the right with the other hand.

*Screw and anchor mount holds up to 2 pounds*

Mounting: Adhesive 3M Strips

1. Remove backer from one side of adhesive and apply to back of shelf.

2. Remove backer from the other side of adhesive. Be sure to align the shelf where you would like the first time. It is recommended placing a small level on top while mount to ensure correct mount the first time.

3. Press firmly to the wall for 30 seconds.

4. Wait 24 hours before placing items on the shelf.

*Adhesive 3M strips hold ONLY one vinyl record*

Thank you for your purchase!

Powered by GoDaddy

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

Accept